Tascam CD-01U Manuel d'utilisateur télécharger pdf (Page 20)

By using an external timer, you can set the CD-

01U/CD-01U Pro to play the loaded disc automatically

when the unit is turned on by the timer.

1 First, plug the power cord of the CD-01U/CD-01U

Pro into the power outlet of the timer.

2 Load a CD into the unit.

3 Set the TIMER menu (menu number 07 TIMER) to on.

4 Set the timer to the desired time.

Consult the timer's operation manual for details.

At the set time, the power to the CD-01U/CD-01U Pro

will be turned on, and playback will automatically begin.

Both analog and digital output can be set to mono out-

put mode.

Set the mono output mode on and off on the menu

(menu number 08 MONO).

When the this function is on, MONO indicator is lit on

the display.

Even when the power is turned off, this setting is main-

tained.

The Intro Check function allows only the beginning of

each track to be played for 10 seconds.

This function is operational both at stop and during nor-

mal playback.

1 Press the STOP/INTRO CHECK key on the front

panel when SHIFT indicator is lit and playback stops.

Or, pressing the INTRO CHECK key on the remote

control to turn the intro check function on and off.

Int is shown on the display.

2 Press the ¥?π key on the front panel or ¥key on

the remote control.

This function works in normal (continuous) play mode

and program play mode.

To exit the intro check mode, press ª key on either the

front panel or remote control, or INTRO CHECK key on

the remote control.

The intro check mode is also canceled when play mode

is changed.

Intro Check

Output in monaural

Power on play

Pitch control

7 - Advanced operations

20 TASCAM CD-01U/CD-01UPro

When playing back an audio CD or MP3, the pitch (or

speed) of the playback can be varied.

Pitch can be varied +/- 12.5%.

1 Press the PITCH knob on the front panel when

SHIFT indicator is unlit or press the PITCH key on

the remote control to turn the Pitch Control function

on and off.

When the pitch control function is activated, pitch

value is shown on the display and PITCH indicator

lights.

2 Rotate the PITCH knob or use the PITCH +/- keys to

set the pitch.

Use the PITCH menu (menu number 12 PITCH) to

adjust the pitch control steps from 0.1, 0.5, or 1.0%

(Default: 0.1%).

Digital output provides the 44.1KHz digital signals con-

stantly even if pitch control is activated.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire

Tascam CD-01U Manuel d'utilisateur Page 20

Commentaires sur ces manuels