Tascam CD-01U Manuel d'utilisateur télécharger pdf (Page 7)

1 - Introduction

ŒŒ

Environmental considerations

The CD-01U/CD-01U Pro have been designed for the

playback of CD-DA format discs and MP3 files record-

ed in ISO9660 format. In addition to ordinary 5-inch and

3-inch CDs, it can also play properly recorded CD-R

and CD-RW discs.

When removing a CD from its case, press down on the

center of the disc holder to free the CD, then lift the disc

out, holding it carefully by the edges.

≠ Removing a disc

≠ Hold the CD like this

≠ Avoid getting fingerprints on the signal side (opposite

the label side). When cleaning, wipe gently with a soft

cloth from the center towards the outside edge. Dust

and grime may cause skipping, so keep discs clean

and store them in their cases when not being played.

≠ Do not use any record spray, anti-static solutions,

benzene, paint thinner or other chemical agents to

clean CDs as they could damage the delicate playing

surface.

≠ Discs should be returned to their cases after use to

avoid serious scratches that could cause the laser

pickup to skip.

≠ Keep discs away from direct sunlight, and places of

high heat and humidity. If left in such places, warping

could result.

≠ Do not affix any labels or stickers to the label side of

the disc. Do not write on the disc with a ballpoint

pen.

≠ Please do not insert discs that have adhesive remain-

ing from tape or stickers that have been removed. If

they are inserted into the player, they could stick to

the internal mechanism, requiring removal by a tech-

nician.

≠ Only use circular compact discs. Avoid using non-cir

cular promotional, etc. discs.

≠ The CD-01U/CD-01U Pro cannot play unfinalized

CD-R/RW discs.

≠ Do not use a C-thru disc.

The unit does not support a C-thru disc. Therefore,

you may not be able to insert a C-thru disc or may

not be able to remove a C-thru disc that has been

successfully inserted to the unit.

In the latter case, try to press the DISPLAY and

EJECT keys simultaneously, which may solve the

problem.

≠ Do not use the DualDisc. DualDisc is two-sided play-

back only discs. Insertion or ejection of a DualDisc

into/from CD-01U/CD-01U Pro is likely to cause

scratches to the surface of the DualDisc. Scratched

discs may not play in CD products.

A DualDisc may not play in CD-01U/CD-01U Pro and

a DualDisc could get stuck in and may not be able to

be removed from the CD-01U/CD-01U Pro.

Handling of compact discs

TASCAM CD-01U/CD-01UPro 7

Use the rack-mounting kit to mount the unit in a

standard 19-inch equipment rack, as shown below.

Remove the feet of the unit before mounting.

If you are mounting the unit in a rack, leave 1U of

space above it and 10cm (4 in) or more of space at

the rear. The CD-01U/CD-01U Pro can be mounted

in any angle between 0 to 90 degrees.

SeeEnvironmental considerationson the previous page.

Rack-mounting the unit

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Tascam CD-01U Manuel d'utilisateur Page 7

Commentaires sur ces manuels